Products
Showing all 25 results
480 Poplin Black – Non-printable Liner for Light Blocking
480 Poplin Black is 100% Polyester. It is an excellent liner in double sided banner applications or backer for banners or trade show exhibits.
Width: 62" Weight: 4.9 oz/yd2 (165 g/m2) Construction: Woven Flame Retardancy: Not FR Suggested Applications: Light Blocking Liner
DD 7118 White-Out – Direct Disperse, Latex, UV-Curable
DD 7118 White-Out is a two-in-one solution for printable fabric with a built-in liner. Developed to protect printing equipment and significantly decrease smoke exhaustion, this opaque fabric has a white specialty coating on the back to prevent see-through. It is an excellent alternative to black-back. Click the button below to request a sample of DD7118 White Out.
Width: 125" Weight: 10.1 oz/yd2 (340 g/m2) Construction: Polyester Flame Retardancy: NFPA 701 Suggested Applications: Banners - Indoors, Opaque/Blockout Liner, Photographic Back Drops, Pillow Case Displays (Tube Frame), Projection Screens, Silicone Edge Graphics
DD 8800 Silver Back – Direct Disperse Printable
DD 8800 Silver Back is an F7 certified fabric. It is a soft signage fabric that is 100% Polyester and features a gray back that provides a built-in liner for finished applications and promotes cost savings in material and labor. It is the fabric of choice for pillow case displays that utilize a tube frame. Click the button below to request a sample of DD8800 Silver Back.
Width: 126" Weight: 10.1 oz/yd2 (340 g/m2) Construction: Knit Flame Retardancy: NFPA 701, Title 19 Suggested Applications: Back Drops, Banners, Exhibit Graphics, Light Blocking, Pillow Case Tension Displays, Retail Displays, Silicone Edge Graphics
ET 9118 White-Out – Dye Sublimation Printable
ET 9118 White-Out is the recycled version of GF 7108 and is a two-in-one solution for printable fabric with a built-in liner. Developed to protect printing equipment and significantly decrease smoke exhaustion, this opaque fabric has a white specialty coating on the back to prevent see-through. It is an excellent alternative to black-back. It is made from 44% post-consumer recycled polyester and has a better white point than traditional textiles made from post-consumer waste. Using recycled polyester keeps plastic PET bottles out of landfills, reduces energy consumption and conserves petroleum resources used to produce virgin polyester. Click the button below to request a sample of ET9118 White Out.
Width: 125" Weight: 10.1 oz/yd2 (340 g/m2) Construction: Polyester Flame Retardancy: NFPA 701, Title 19 Suggested Applications: Banners - Indoors, Opaque/Blockout Liner, Photographic Back Drops, Pillow Case Displays (Tube Frame), Projection Screens, Silicone Edge Graphics
ET 9860 Silver Back – Dye Sublimation Printable
ET 9860 Silver Back is the recycled version of GF8060 and is a soft signage fabric made from 60% post-consumer recycled polyester and features a gray back that provides a built-in liner for finished applications and promotes cost savings in material and labor. It contains 51 recycled 500ml water bottles per linear yard. It is the fabric of choice for pillow case displays that utilize a tube frame. Click the button below to request a sample of ET9860 Silver Back.
Width: 126" Weight: 10.1 oz/yd2 (340 g/m2) Construction: Knit Flame Retardancy: NFPA 701, Title 19 Suggested Applications: Back Drops, Banners, Exhibit Graphics, Frontlit, Light Blocking, Pillow Case Tension Displays, Retail Displays, Silicone Edge Graphics
GF 1707 Soft Knit Black – Non-printable Liner for Light Blocking
GF 1707 Soft Knit Black is 100% Polyester. Made with no-bleed yarns that are 100% colorfast and won’t bleed or fade when washed. It is an excellent liner for double sided banner applications or trade show exhibits. Under ASTM E84, it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. Click the button below to request a sample of GF1707 Soft Knit Black.
Width: 126" Weight: 5.1 oz/yd2 (172 g/m2) Construction: Warp Knit Flame Retardancy: Class A, NFPA 701, Title 19 Suggested Applications: Light Blocking Liner
GF 1708 Heavy Knit Black – Non-printable Liner for Light Blocking
GF 1708 Heavy Knit Black is 100% Polyester. Made with no-bleed yarns that are 100% colorfast and won’t bleed or fade when washed. It is an excellent liner for double sided banner applications or trade show exhibits. Click the button below to request a sample of GF1708 Heavy Knit Black.
Width: 126" Weight: 6.8 oz/yd2 (230 g/m2) Construction: Warp Knit Flame Retardancy: NFPA 701 Suggested Applications: Light Blocking Liner
GF 4010 Black – Liner Only
GF 4010 Black is the recommended replacement for GF4018 Black. It is 100% Polyester and is an excellent liner in double sided banner applications or trade show exhibits. Made with no-bleed yarns that are 100% colorfast and won’t fade when washed. Under ASTM E84, it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. Click the button below to request a sample of GF4010 Black.
Width: 126" Weight: 5.3 oz/yd2 (180 g/m2) Construction: Warp Knit Flame Retardancy: Class A, NFPA 701 Suggested Applications: Light Blocking
GF 4480 Black – Non-printable Liner for Light Blocking
GF 4480 Black is 100% Polyester. It is an excellent liner in double sided banner applications or backer for banners or trade show exhibits. It can also be used by itself for Architectural, Home Furnishings and Photographic Back Drops applications. Click the button below to request a sample of GF4480 Black.
Width: 122" Weight: 8.5 oz/yd2 (286 g/m2) Construction: Warp Knit Flame Retardancy: NFPA 701 Suggested Applications: Architectural, Home Furnishings, Light Blocking Liner, Photographic Back Drops
GF 4608 Power Stretch Black – Non-printable Liner for Light Blocking
GF 4608 Power Stretch Black is 90% Polyester, 10% Spandex. Made with no-bleed yarns that are 100% colorfast and won’t bleed or fade when washed. It is matte and exhibits no crocking. Click the button below to request a sample of GF4608 Power Stretch Black.
Width: 126" Weight: 6.8 oz/yd2 (230 g/m2) Construction: Warp Knit Flame Retardancy: German B-1 DIN 4102-1, NFPA 701 Suggested Applications: Light Blocking Liner
GF 4820 Black – Non-printable Liner for Light Blocking
GF 4820 Black is 100% Polyester. It is super wide and an excellent liner in double sided banner applications or backer for banners or trade show exhibits. Click the button below to request a sample of GF4820 Black.
Width: 192" Weight: 5.5 oz/yd2 (185 g/m2) Construction: 70d, Warp Knit 2 bar 70d Flame Retardancy: NFPA 701 Suggested Applications: Light Blocking Liner
GF 5019 Black – Non-printable Liner for Light Blocking
GF 5019 Black is 88% Polyester, 12% Spandex and has great stretch for geometric displays and table tops. It is made with no-bleed yarns that are 100% colorfast and won’t fade when washed. Click the button below to request a sample of GF5019 Black.
Width: 126" Weight: 5 oz/yd2 (165 g/m2) Construction: Knit Flame Retardancy: NFPA 701 Suggested Applications: Geometric/Stretch Displays, Light Blocking, Table Tops
GF 7108 WhiteOut – Dye Sublimation Printable
GF 7108 White-Out is a superior alternative to traditional black-back fabric for frontlit framing systems. Its exclusive proprietary opaque white-back coating prevents see-through, offering a pristine, professional finish that captivates. Developed to protect printing equipment and significantly decrease smoke exhaustion, this innovative two-in-one solution eliminates the need for extra liner material and additional finishing, streamlining the production process and saving valuable time and resources. Winner of PRINTING United Alliance 2024 Pinnacle Product Award for Media – Textile – Framing Systems (Frontlit). Direct print and recycled versions are also available. Click the button below to request a sample of GF7108 WhiteOut.
Width: 125" Weight: 10.1 oz/yd2 (340 g/m2) Construction: Polyester Flame Retardancy: NFPA 701, Title 19 Suggested Applications: Banners - Indoors, Opaque/Blockout Liner, Photographic Back Drops, Pillow Case Displays (Tube Frame), Projection Screens, Silicone Edge Graphics
GF 7110 X-Out – Dye Sublimation, UV and Latex Printable
GF 7110 X-Out is a Polyester fabric with a proprietary coating. Excellent for Block Out Liner, Drapes and Opaque Single Sided Banner applications. It is registered in the State of California (CSFM Registration Number: F-093901) and meets Section 13115 of the California Health and Safety Code. Under ASTM E84, it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. This product was previously named UV 7110. Click the button below to request a sample of GF7110 X-Out.
Width: 125", 62" Weight: 7.5 oz/yd2 (252 g/m2) Construction: Polyester with proprietary coating Flame Retardancy: Class A, CSFM F-093901, German B-1, NFPA 701, Title 19 Suggested Applications: Architectural, Banners - Indoors, Home Furnishings, Opaque/Blockout Liner, Photographic Back Drops, Projection Screens
GF 7175 Deco-Block (DISCONTINUED) – UV and Dye Sublimation Printable
GF 7175 Deco-Block is a Polyester fabric with a slight sheen that is excellent for Block Out Liner, Draperies and Opaque Single Sided Banner applications. Click the button below to request a sample of GF7175 Deco-Block.
Width: 125" Weight: 8 oz/yd2 (270 g/m2) Construction: 100% Polyester Flame Retardancy: NFPA 701 Suggested Applications: Banners - Indoors, Home Furnishings, Opaque/Blockout Liner, Photographic Back Drops
GF 7210 X-Out Super Soft (DISCONTINUED) – Non-printable Liner
GF 7210 X-Out Super Soft is a Polyester fabric with and acrylic coating. Excellent for Block Out Liner applications, it is light weight and creates a very clean cutting and sewing environment that is dust free. Click the button below to request a sample of GF7210 X-Out Super Soft.
Width: 125" Weight: 7.1 oz/yd2 (240 g/m2) Construction: Base: Polyester; Coating: Acrylic Flame Retardancy: NFPA 701, Title 19 Suggested Applications: Opaque/Blockout Liner, Projection Screens
GF 8819 DS Nirvana – UV-Curable and Dye Sub Transfer Printable
GF 8819 DS Nirvana is a double-sided fabric that consists of two pieces of GF4019 Nirvana laminated together, with the black-back facing in. It has excellent opacity and durability. Click the button below to request a sample of GF8819 DS Nirvana.
Width: 122" Weight: 13.2 oz/yd2 (444 g/m2) Construction: Warp Knit Flame Retardancy: NFPA 701, Title 19 Suggested Applications: Double-sided Banners, Exhibit Graphics, Retail Displays
GF 8860 Silver Back – Dye Sublimation Printable
GF 8860 Silver Back is a soft signage fabric that is 100% Polyester and features a gray back that provides a built-in liner for finished applications and promotes cost savings in material and labor. It is the fabric of choice for pillow case displays that utilize a tube frame. Click the button below to request a sample of GF8860 Silver Back.
Width: 126" Weight: 10.1 oz/yd2 (340 g/m2) Construction: Knit Flame Retardancy: NFPA 701, Title 19 Suggested Applications: Back Drops, Banners, Exhibit Graphics, Frontlit, Light Blocking, Pillow Case Tension Displays, Retail Displays, Silicone Edge Graphics
GF 8873 wht/blk/wht DISCONTINUED – Dye Sublimation Printable
GF 8873 wht/blk/wht is 100% Polyester. It is a three-layer fabric with a layer of black fabric in the middle, making it almost completely opaque and allowing for double sided printing. It meets B-1 (DIN-4102). Under ASTM E84 (UL 723), it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. Click the button below to request a sample of GF8873 wht/blk/wht.
Width: 125" Weight: 8.4 oz/yd2 (283 g/m2) Construction: Three Layered Woven Flame Retardancy: Class A, German B-1, NFPA 701, Title 19 Suggested Applications: Architectural, Double Sided Banners, Light Blocking Liner, Silicone Edge Graphics
GF 8875 Dimmer – Dye Sublimation Printable
GF 8875 Dimmer is a 100% Polyester three-layer fabric with a layer of black fabric in the middle, making it almost completely opaque and allowing for double sided printing. It is the replacement for GF 8873 wht/blk/wht. Click the button below to request a sample of GF8875 Dimmer.
Width: 125" Weight: 6.9 oz/yd2 (233 g/m2) Construction: Three Layered Woven Flame Retardancy: NFPA 701 Suggested Applications: Architectural, Double Sided Banners, Light Blocking Liner, Silicone Edge Graphics
GF 8880 Opaque White – Dye Sublimation Printable
GF 8880 Opaque White is 100% Polyester. Named for its light blocking capabilities, it has an extreme white point and allows printing on either side without the use of a blockout liner on the inside. This three-layered fabric consists of a white face and back with a black layer sandwiched in between. Excellent for double sided banners, it provides cost savings in both material and labor. Tested under AATCC 148-1989, this fabric produced 1.3% transmitted light and 98.7% blocked light. Under ASTM E 84 (UL 723) it meets Class A, Flame Spread Index 25 or less and Smoke Developed Index 450 or less. Click the button below to request a sample of GF8880 Opaque White.
Width: 125" Weight: 8.0 oz/yd2 (269 g/m2) Construction: Three Layered Woven Flame Retardancy: Class A, NFPA 701, Title 19 Suggested Applications: Double Sided Banners, Light Blocking Liner, Silicone Edge Graphics
GF 9048 Black – Non-printable Liner for Light Blocking
GF 9048 Black is 100% Polyester and is an excellent liner for geometric displays and tension structures. Click the button below to request a sample of GF9048 Black.
Width: 126" Weight: 7.4 oz/yd2 (250 g/m2) Construction: Knit Flame Retardancy: NFPA 701 Suggested Applications: Light Blocking
Silver Flag Liner – Non-printable for Light Blocking
Silver Flag Liner is 100% Polyester. It makes an excellent flag liner for any flag fabric. The silver color of the liner material helps reflect brighter color of the printed material. It has a double sided acrylic coating and is moderately opaque so that the view is blocked from the other side.
Width: 125" Weight: 2.65 oz/yd2 (90 g/m2) Construction: Woven Flame Retardancy: Not FR Suggested Applications: Flag Liner, Light Blocking Liner
Silver Flag Liner – Non-printable for Light Blocking
Silver Flag Liner is 100% Polyester. It makes an excellent flag liner for any flag fabric. The silver color of the liner material helps reflect brighter color of the printed material. It has a double sided acrylic coating and is moderately opaque so that the view is blocked from the other side.
Width: 60" Weight: 2.1 oz/yd2 (71 g/m2) Construction: Woven Flame Retardancy: Not FR Suggested Applications: Flag Liner, Light Blocking Liner
TD 8865 Genesis
TD 8865 Genesis is a 100% knit polyester fabric with a textile grey backside, engineered for maximum opacity without sacrificing white point. It is designed for dye sublimation printing and does not create odors or fumes when being run through a calender. It has a soft, luxurious feel and excellent printability. Genesis is ideal for tradeshow exhibit graphics, hanging signage, backdrops, tension frames, and virtually any frontlit soft signage application. Click the button below to request a sample of TD 8865 Genesis.
We offer complimentary sample swatches, yards, and rolls exclusively to registered print businesses and companies utilizing third-party printers in the U.S. and Canada. Personal or non-business requests will not be fulfilled. A UPS or FedEx account is required for yard or roll orders.
Width: 126" Weight: 9.7 oz/yd2 (330 g/m2) Construction: Warp Knit Flame Retardancy: NFPA 701; Title 19 Suggested Applications: Banners - Indoor, Exhibit Graphics, Light Blocking, Photographic Back Drops, Retail Displays, Silicone Edge Graphics
Showing all 25 results